Download Print this page
Kenmore 415.30810800 Use And Care Manual
Kenmore 415.30810800 Use And Care Manual

Kenmore 415.30810800 Use And Care Manual

Liquid propane gas grill
Hide thumbs Also See for 415.30810800:

Advertisement

Quick Links

Use and Care Guide
LiquidPropaneGasGrill
Kenmore Model No. 415.30810800
®
This Grill is For
Outdoor Use Only
• Read this manual
before
cooking
on
grill.
Failure
to follow
all
manufacturer's
instructions
could
result
in fire or explosion
which could
cause property
damage,
personal
injury or death.
• Combustion
by=products
produced
when
using this product
contain
chemicals
known
to the State of
California
to cause cancer,
birth
defects,
or other reproductive
harm.
CAUTION
• Read and follow
all Safety
Statements,
Assembly
instructions
and Use & Care Directions
before
attempting
to assemble
and cook.
• Some
parts may contain
sharp
edges,
especially
as noted
in these
instructions.
Wear protective
gloves
if necessary.
• Parts
• Assembly
• Safety
Rules
• Use and Care
• Troubleshooting
Assembly
Questions?
Call 1 =800=241 =7548
Parts Ordering:
Call 1 =800=4=MY=HOME ®
To InstalledAssembler:
Leave
these
instructions
with
consumer.
To Consumer:
Keep this
manual
for future
reference.
Sears, Roebuck
and Co., Hoffman
Estates,
IL 60179
U.S.A.
©2007Sears, RoebuckandCo., All Rights Reserved
Printed in China
466810608 • 80016470• 11-14-07

Advertisement

loading

Summary of Contents for Kenmore 415.30810800

  • Page 1 Use and Care Guide ® LiquidPropaneGasGrill Kenmore Model No. 415.30810800 This Grill is For Outdoor Use Only • Read this manual before cooking grill. Failure to follow manufacturer's instructions could result in fire or explosion which could cause property damage, personal injury or death.
  • Page 2 CALIFORNIA PROPOSITION65 if you smell gas: 1. Combustion by-products producedwhen using this product contain chemicals known to the State of 1. Shut off gas to the appliance. California to cause cancer, birth defects, and other reproductive harm. 2. Extinguish any open flame. 2.
  • Page 3 This warranty is void if this grill is used for commercial or Congratulations on making a smart purchase. Your new rental purposes. Kenmore®product is designed and manufactured for years of dependable operation. But like all products, it may require repair from time to time. That's when having a Repair Protection This warranty applies only if this grill is used in the United Agreement can save you money and aggravation.
  • Page 4 LP Tank • The LP tank used with your grill must meet the following requirements: Use LP tanks only with these required measurements: 12" (30.5cm) (diameter) x 18" (45.7 cm) (tall) with 20 lb. (9 kg.) capacity maximum. LP tanks must be constructed and marked in accordance with •...
  • Page 5 LP Tank Exchange Connecting Regulator To The LP Tank o Many retailers that sell grills offer you the option of replacing 1. LP tank must be properly secured onto grill. (Refer to assembly section.) your empty LP tank through an exchange service. Use only those reputable exchange companies that inspect, precision fill, 2.
  • Page 6 Leak Testing Valves, Hose and Regulator 1. Turn all grill controlknobs to OFF. Be sure regulator is tightly connected to LP tank. Completely open LP tank valve by turning OPD hand wheel counterclockwise. If you hear a rushing sound, turn gas off immediately.
  • Page 7 Safety Tips ,A. Before opening LP cylinder valve, check the coupling nut for tightness. For Safe Use Of Your Grill And To Avoid Serious A When grill is not in use, turn offall control knobs and LP cylinder valve. injury: A Never move grill while in operation or still hot.
  • Page 8 Before Your First Cookout Main burner ignitor Lighting A Do not lean over grill while lighting. , Light burners, check to make sure they are lit, close the lid and 1. Open lid during lighting. warm up grill on HIGH for 15 minutes. This curing of paint and 2.
  • Page 9 Turning Grill Off CAUTION l ll . Turn all knobs to OFF position. Turn LP tank off by turning OPD hand wheel clockwise to a full stop. Ignitor Check SPIDER ALERT! • Turn gas off at LP tank. Press and hold ignitor button. "Click" should be heard and spark seen each time between collector GASCOLLECTOR box or burner and electrodes.
  • Page 10 Storing Your Grill Cleaning the Burner Assembly Follow these instructions to clean and/or replace parts of burner . Clean cooking grates. assembly or if you have trouble igniting grill. . Store in dry location. Turn gas off at control knobs and LP cylinder, o When LP tank is connected to grill, store outdoors in well- Remove cooking grate and vaporiser bar.
  • Page 11 Description ......Part# Description ......Part # Side BurnerPan..... 80006246 UpperLeg......80010075 Leg,LeftFront ...... 80010080 Side BurnerAssembly....80015910 Leg,LeftBack....... 80010079 Grate,Side Burner....80009728 Leg,RightFront ..... 80010077 SidebumerClip ..... 80015911 LegRight Back...... 80010078 WingNut ......80015911 Side Brace ......80010076 #8X3/8"Self-Tap Screw ....80015911 SupportBracket.....
  • Page 12 ® ® © "---_@4.._ 12°466810608...
  • Page 13 LeftLeg Placeone upperleg as shown. NOTE:Left front and left back legsdo not haveleg extenders In front,attachupperleg, side braceand left front leg (curve)with #10-24x1-1/4"screw and #10-24flange nut. In back,attach upperleg,sidebraceand left back leg (straight)with #10-24x1-1/4"screw and #10-24flange nut. Do not tighten. Attachsupportbracketin secondholefrom bottomof leg with hingepinsand hitchpins (A).
  • Page 14 Hooktank exclusionwire intolegswith openingfor LPcylinderon side braceside. Tank ExclusionWire Side Brace Largeropeningside TankExclusionWire Lay front legs down on the floor. Upperand Lower Panels Fit upperpanelwith two tabs betweenlegs.Attachwith #10-24x2"screws and #10-24 flange nuts. Fit lowerpanelaroundtank exclusionwire and attachwith #10-24x2"screws and #10-24flange nuts. UpperPanel #10-24x2"Screw Qty:8...
  • Page 15 Back Braces to Cart Removepreviouslyattachedscrewsand nutsfrom upper legsasshown.Attachback braceswith #10-24x1-1/4"screws and #10-24flange nuts. Back Brace #10-24x1-1/4" Remove screws and Screw nuts to attach back brace Qty:6 #10-24FlangeNut Qty:6 BackBrace Wheels Turnassemblyupsidedown. Insertaxlerod throughwheel, legsandotherwheel.Attachwith a wheelbushingand hitch pin. WheelBushing7 Qty:l Axle Rod Wheel HitchPin...
  • Page 16 Control Panel and Upper FireboxSupports Standcart upright. In front, fit control panel betweenleft and rightlegs. Insert#10-24x2" screws to hold panel in place. Placeupper firebox supportsontoscrews makingsure angleside is facing thefront and attachwith #10-24flange nuts, In back,attachupperfireboxsupportwith #10-24x2" screws and#10-24flange nuts, ControlPanel .,,,_ UpperFirebox...
  • Page 17 Heat Shield Attach heatshieldwith #10-24x1/2"screws and#10-24flange nuts. HeatShield #10-24Xl/2" S crew Qty: 2 #10-24FlangeNut Qty:2 Tank Retainer Inserttank retainerintoside braceand securewith wingscrew. Wing Screw Qty:l Retainer 466810608o17...
  • Page 18 Burner, Firebox and Control Knobs Placeburnerassemblyintofirebox (A).Fastenthe burnerassemblyto thefirebox using5ramfiber washers and #10-24x 1/2" machine screws. Placefireboxontoupperfireboxsupportswith burnertubes belowheatshield.Makesure burner tubes are correctly engaged. If burneris notleveledfrom left to right,adjustthe two screwsattachingvalvestemsto controlpanel.Attachignitorwireto ignitor (B). Attachfireboxwith #10-24x1/2"screws, 5ramfiber washers and #10-24flange nuts (C). Pushcontrol knobsonto valvestems (C).
  • Page 19 Shelves Insertmountingbracketsintoside shelfsupportswith #10-24x1/2"screws (A). Attachbackof leg with 1/4"-20x!-1/4" screw and1/4"-20flange nuts, Do notfully tighten.Attach mountingbrackets to front of leg with 1/4"-20x1/2"screws (B), Fullytighten all screws. Repeatabovestepsto attachsideburnershelf to cart. #10-24x1/2" 1/4"-20xl/2" 1/4"-20FlangeNut Screw Screw Qty:4 Qty: 8 Qty:4 1/4"-20x1-1/4" Screw Qty:4 MountingBracket...
  • Page 20 Sideburner Attachsideburnervalvewith #8-32x3/8"machine screws (A). Attachsideburnerpanwith #8x3/8"self-tap screws and 5mm ID 9ramODfiber washers. Placesideburnerinto shelf. (B). Makesurevalve is insidesideburnertube.Attachsideburnerwith wing nut and 5mm ID 9mm ODfiber washer. Insertone end of burnerclip into holein sideburnertubeand hookotherend aroundvalvemanifold.Attachsideburnerignitorwire (C). Presssideburnercontrolknobontovalvestem and sideburnergrateontoshelf (D). SideburnerValve #8-32x3/8"...
  • Page 21 LowerFireboxHinges Attachlowerhingesto backof firebox using#10-24x1/2"screws, 5ramfiber washers and #10-24flange nuts. Thecenterflat portionof the hingeshouldbe at the bottom(seeinset). 5mm FiberWashers #10-24FlangeNut #10-24x1/2" Qty:8 Qty:4 Screws Qty:4 Lid Handleand Upper Hinges Attachhandleto lid with 5.5ramID, 19mm ODfiber washers,5.5mmID, 19ramODflat washersand #10-24x3/4"screws. Attachupperhingesto backof lid with #10-24x1/2"screws, 5ramfiber washers and #10-24flange nuts. Hingesshouldcurve downward when properlyinstalled.
  • Page 22 Place lid assembly onto firebox, aligning hinges. Hinges on lid fit inside hinges on firebox. Secure using two hinge pins and hitch pins (See inset ). HitchPins Qty:2 HingePins Qty:2 Heat Diffuser Place heat diffuser over screws in firebox. Heat Diffuser 22 •...
  • Page 23 Cooking Grate Placegrateintofirebox. Cooking Swing Away Insertendsof SwingAway pivotwire intoholesin sidesof grill lid.Insertendsof SwingAway legwire into holesin sidesof firebox. NOTE:Pivotand legwires,runningside-to-side, s houldbe underwires runningfront-to-back.If pivotand leg wiresare on top, SwingAway is installedupside-down. SwingAway Pivot Wire Leg Wire 466810608.23...
  • Page 24 GreaseCup Clip and GreaseCup Hanggreasecup clipfrom bottomof fireboxand placegreasecupintogreasecupclip. CAUT|ON Failure to installgreasecup clip and cup will cause hot grease to drip from bottom of grill with risk of fire or property damage, GreaseCup Clip GreaseCu LP Tank LP tank is soldseparately.Useonlywith an OPD(over-fillprotectiondevice)equippedLPtank. Filland leakcheck before attachingto grill and regulator.
  • Page 25 Troubleshooting EMERGENCIES: if a gas leak cannot be stopped, or a fire occurs due to gas leakage, call the fire department. Gasleakingfrom , Damaged hose. , Turnoff gas at LP tank. If hoseis cut or cracked,replace cracked/cut/burned valve/hose/regulator. See LP TankLeakTestand Connecting hose.
  • Page 26 Troubleshooting (continued} , Push-button sticksat bottom.. Burner(s) w ill not light , Replaceignitor. usingignitor. , Sparkingbetweenignitorand electrode. , Inspectwire insulationand properconnection.Replacewires if insulationis broken. Burner(s) w ill not , See "GAS ISSUES:"on previouspage. matchlight. , Impropermethodof match-lighting. , See"Match-Lighting" s ectionof Useand Care. Suddendrop in gas , Outof gas.
  • Page 27 Troubleshooting - Electronic ignition SECTION I Nosparksappearat , Batterynotinstalled , Checkbatteryorientation. . Installbattery(makesurethat "+"and "-" anyelectrodeswhen properly. connectorsare orientedcorrectly, w ith "+" end up and "-" end down.) ignitionbuttonis pushed;no noisecan be heardfrom spark . Deadbattery. . Has batterybeenused , Replacebatterywith newAA-sizealkalinebattery. module.
  • Page 28 Your Home ':;i_i_i_i_i_i iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii Forrepair-in yourhome-ofall majorbrand appliances, iiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii lawn and garden equipment, or heating and cooling systems, iiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii n omatterwhomadeit, nomatterwhosoldit! iiiiiiiiiiiiii HHHHHHH iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii Forthe replacement parts, accessories and iiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii o wner'smanualsthatyouneedtodo-it-yourself, iiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii gorSears professional installation ofhomeappliances iiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii anditemslikegaragedooropenersandwaterheaters,...