Advertisement
17
Control Panel and Upper FireboxSupports
Standcart upright.
In front, fit control panel betweenleft and rightlegs. Insert#10-24x2" screws to hold panel in place. Placeupper firebox
supportsontoscrews makingsure angleside is facing thefront and attachwith #10-24flange nuts,
In back,attachupperfireboxsupportwith #10-24x2" screws and#10-24flange nuts,
17
ControlPanel
.,,,_
\
#10-24x2"Screw
Qty:8
UpperFirebox
Support
13
#10-24FlangeNut
Qty:8
Valve/Hose/Regulatorand Electronic ignitionModule
Attachvalve/hose/regulator assemblyto controlpanelwith #10-24x1/2"screws (A),
Removeignitorcapand plastichexnutfrom ElectronicIgnitionmoduleassembly.Insertmoduleintotheopeningon controlpanel,
and attachwith the removedhexnut. PlaceAA batteryintomoduleslot with positiveend (+)facing outward.Screwignitorcap onto
module(B).
27
#10-24X1/2" Screw
Qty:2
Valve/Hose/Regulator
\
\
\
Ignitor Cap
HexNut
\
ElectronicIgnitionModule
16,466810608
Advertisement
