Using Additional Map Data; Simulator Mode - Garmin GPSMAP 96 Pilot's Manual

B o >
aSIc peratIon

Using Additional Map Data

Optional MapSource CD-ROMs enhance the
versatility of your GPSMAP 96/96C. With optional
MapSource City Select data, you can view listings
of nearby restaurants, lodging, shopping centers,
attractions and entertainment, and even retrieve
addresses and phone numbers for any listed location.
With optional BlueChart data, you can access
marine navaids, wrecks, obstructions, and anchorage
locations.
The included USB Interface Cable or an optional PC
Interface Cable (with a serial connector) is used to
transfer MapSource CD-ROM data to the unit.
To aid in learning to use the GPSMAP 96/96C, please
use the Simulator Mode. Simulator Mode is also
helpful for practicing with the unit indoors or when
no satellite signals are available. All waypoints and
routes created in Simulator Mode are retained in
memory for future use.


Simulator Mode

The main purpose of using a GPS receiver is for
navigating to a known position. To get a feel for
navigating with the GPSMAP 96/96C, it is a good
idea to practice navigation in Simulator Mode.
Start Simulator Option
WARNING: Do not attempt to navigate using
Simulator Mode, the GPS receiver is turned off.
Any Satellite Signal Strength Bars or navigation
shown are only simulations and do not represent
the strength of actual satellite signals or route
navigation.
96/96C Owner's Manual