C
Y
GPSMAP 296 >
USTOMIZING
OUR
Additional Map Data Displayed
You can view the data that is currently loaded on your GPSMAP 296
unit and data card.
To review/change data card information:
1. Access the Map page and press MENU.
2. From the options menu, highlight Map Information and
press ENTER.
Map Family
highlighted.
Press ENTER
to view the
individual maps
in the family.
Data Card Information Page
3. The first page shows the Map Families that are stored on the
data card and whether they are shown on the Map page.
To change the setting for a Map Family, highlight the box next
to the Map Family name and press ENTER to select (check
mark) or deselect (no check mark) the Show setting.
4. To view the list of maps within a Map Family, highlight the
name of the Map Family and press ENTER.
106
S
S
ETTING UP THE
YSTEM
Individual Map Information Page
Showing the individual maps that are in the selected Map Family
5. To view detailed information about an individual map,
highlight the Map Name and press ENTER. Highlight OK and
press ENTER to exit the map information page.
6. To select/deselect individual maps for display on the Map
page, highlight the box next to the desired map, and press
ENTER to check/uncheck the Show box. Or, press MENU
and select one of the options (Show All, Hide All, or Show
Defaults), and press ENTER.
7. Press QUIT to exit the Data Card Information page.
GPSMAP 296 Pilot's Guide