Using Additional Map Data; Changing The Zoom Range - Garmin 012-01097-00 Owner's Manual

M p >
aIn aGeS
You can add and configure up to four optional data
fields to the top of the page to provide a variety of
travel and navigational information.

Using Additional Map Data

Optional MapSource mapping data disks enhance
the versatility of your Tracking System. With
MapSource data, you can view listings of nearby
restaurants, lodging, shopping centers, attractions,
and entertainment, and you can retrieve addresses and
phone numbers for any listed location. With additional
BlueChart data, you can access information, such as
marine navaids, wrecks, obstructions, and anchorage
locations.
You can view the data currently loaded on your unit
and microSD card.

Tracking System Owner's Manual F22 22

Changing the Zoom Range

You can change the zoom range on the Map Page to
view a smaller area in greater detail or view a larger
area with less detail. Press IN to decrease the zoom
range and show an area with greater detail; press
OUT to increase the zoom range and show a larger
area with less detail.
The current zoom range setting is shown in the
lower-left corner of the Map Page. If no further map
information is available, "overzoom" appears under
the zoom range. When using MapSource maps,
"mapsource" appears below the scale.
Tracking System Owner's Manual - Draft
1/16/2007 1:51:44 PM