AR3030 operating manual
Enter the two digit memory channel number which you wish to erase such as
[2] [3]. The legend "—" will be replaced by memory channel number which you
have selected "23" and will flash.
Complete the delete sequence by pressing the [ENT/BS] key. A beep confirms
correct data entry and the completion of the delete sequence. The receiver will
automatically revert to VFO mode.
To abort memory delete press the [M.in] key.
Deleting a block of memory channels
Let us assume that you wish to delete memory channels 30 to 45 inclusive.
While in VFO mode press the [M.in] key and the LCD will show the first
available memory channel flashing.
Now press the [PASS] key which changes the LCD to show both "dEL-CH" and
"—" legends.
Enter the lower two digit memory channel number which you wish to erase i.e.
[3] [0]. The legend "—" will be replaced by memory channel number which you
have selected "30" and will flash.
35