Hard Drive - HP Envy 6 Maintenance And Service Manual

Hard drive

Description
320-GB 7200RPM SATA 7mm
320-GB 5400RPM SATA 7mm
500-GB 5400RPM SATA 7mm
32-GB mSATA solid-state drive (SSD)
128-GB mSATA solid-state drive (SSD)
Before removing the hard drive or SSD, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the display panel (see
5. Remove the base enclosure (see
6. Disconnect the battery cable (see
Remove the hard drive:
1. Disconnect the hard drive cable from the system board (1), and then remove the 4 screws (2)
securing the hard drive to the top cover.
38 Chapter 4 Removal and replacement procedures
Display panel on page
Base enclosure on page
Battery on page 36).
Spare part number
634862–005
645193–005
683802–005
687100–001
687101–001
32).
34).