Power Connector Cable - HP Envy 6 Maintenance And Service Manual

3. Remove the USB/Audio board (3).

Power connector cable

Description
Power connector cable (includes bracket)
Before removing the power connector cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the display panel (see
5. Remove the base enclosure (see
6. Disconnect the battery cable (see
7. Remove the subwoofer (see
8. Remove the security bracket (see
9. Remove the USB/Audio board (see
Display panel on page
Base enclosure on page
Battery on page 36).
Subwoofer on page 56).
Security bracket on page
USB/Audio board on page
32).
34).
57).
58).
Component replacement procedures
Spare part number
686593–001
59