To Adjust The Simulated Boat Speed; To Steer The Boat; To Change The Highway Scale Display; To Change A Data Field - Garmin GPSMAP 235 Sounder Owner's Manual

GETTING STARTED
Using the Navigation Page
A
B
A. To reset the simulator to steer the desired course
automatically, select the 'Auto COG' setting from
the options menu.
B. The highway scale can be set to a 1/4-, 1/2-, 1-, 2-,
or 4-nm/mi/km range with the ZOOM keys.
16
Navigation Page (con't.)

To adjust the simulated boat speed:

R
1. Press the UP arrow of the
ments. Press the DOWN arrow to decrease the speed in the same increments.

To steer the boat:

1. Press the LEFT or RIGHT arrows of the
Notice that as you get off course, the highway and waypoint pointer move to
give you graphic guidance to get back on course. The scale in the lower right cor-
ner of the page represents the total distance (or the width) of the base of the high-
way display. The default graphic highway setting is 1/4 nm, but can be set for a
1/2-, 1-, 2- or 4-nm range.

To change the highway scale display:

1. Press the H or I key in either direction (up to increase, down to decrease the
scale).
The Navigation Page data fields can also be configured to display any of eight
different navigation information categories. Let' s change the ETE field to ETA (esti-
mated time of arrival).

To change a data field:

O
1. Press the key to display the position page options.
2. Highlight the 'Change Data Fields?' option and press
appear in the top-left data field (the COG field).
R
3. Use the keypad to move the field highlight to the ETE field and press
T
'ETA' option and press , and press
Now that you've seen the five main pages, let' s look at the active route page,
which appears in the main page sequence whenever you are navigating a route:
J
1. Press .
keypad to increase the speed in 5 knot/kph/mph incre-
R
keypad.
T
. The field highlight will now
Q
to finish.
T
. Highlight the