Section 3: Map - Garmin GPSMAP 130 Owner's Manual And Reference Manual

• Setup Page Display?— allows you to specify the number of fields displayed in the
data window section of the map page. A graphic compass tape or CDI scale may
also be displayed. The following options are available:
• 2 Fields
• 2 Fields & CDI
• 4 Fields & Compass
• 6 Fields
• 6 Fields & CDI
To select a page display option:
1. Highlight the 'Setup Page Display?' option and press
2. Select the desired option and press
• Change Data Fields?— allows you to specify the data displayed in each data field
used on the map display. The following options are available:
• BRG- bearing to active wpt
• SOG- speed over ground
• ETE- estimated time enroute • ETA- estimated time of arrival
• XTK- crosstrack error
• TRN- turn angle to wpt
To change a data field:
1. Highlight the 'Change Data Fields?' option and press
2. Move the field highlight to the desired field and press
3. Select a data field option and press
• Restore Defaults?— resets all map page options (except map configuration
options, see pages 27-28) to the factory settings.
• Setup Simulator?— allows you to define speed, course and position values while
in simulator mode. See the Getting Started Tour for more on using simulator mode.
• 2 Fields & Compass
• 4 Fields
• 4 Fields & CDI
• 6 Fields & Compass
• 8 Fields
T
.
T
.
• DIS- distance to active wpt
• COG- course over ground
• VMG- velocity made good
• WPT- active wpt name
T
.
T
.
T
.
MAP PAGE
Page Display
& Data Fields
A
B
A. The map page can be configured to display a vari-
ety of navigation data.
B. Each data field can be set to display one of ten data
options.
SECTION
3
29