User Waypoint Information - Garmin PERSONAL NAVIGATOR GPS 95 XL Owner's Manual

Intersections are only selected by identifier. Once an intersection is selected,
the identifier of, bearing from, and distance from the nearest VOR will be
displayed. (NOTE: The VOR is simply the nearest facility and is not
necessarily the VOR used to define the intersection.)
To select an Intersection...
· Press WPT/SUA and, if needed, the WPT softkey to display the
Waypoint Definition Page.
· If "INT" for intersection, is not currently displayed in the upper left
corner: press the right arrow key to place the cursor on the cyclic field,
then press CLR (repeatedly) until "INT" is shown.
· Press the right arrow key to move the cursor to the right of "INT".
· Enter the identifier of the desired intersection using the alphanumeric
and arrow keys. Press ENT. The information for the selected
intersection is displayed.

3.6 USER WAYPOINT INFORMATION

2
4
6
In addition to the airport, VOR, NDB and intersection information that is
already stored in your GPS 95, you may enter an additional 500 locations as
user waypoints.
The GPS 95 will display the following user waypoint information:
1) Waypoint identifier
2) Location (latitude/longitude or grid system)
3) Reference waypoint identifier
4) Bearing from reference waypoint to selected user waypoint
5) Distance from reference waypoint to selected user waypoint
6) User comments
1
3
5
3-9