Garmin PERSONAL NAVIGATOR GPS 95 XL Owner's Manual page 128

· Remove the power/data cable screws.
· Remove the coinslot screw
· Slide the cradle off of the yoke mount bracket as shown.
To attach the cradle and power/data cable to the surface mount...
· Slide the connector into the corresponding slot in the cradle as shown.
· Install the coinslot screw.
· Install the cable screws to secure the power/data cable. Make sure the
rounded end of the cable connector is to the left side as shown in the
drawing above to ensure that the connector will mate properly with the
GPS 95.
C-11