Garmin PERSONAL NAVIGATOR GPS 95 XL Owner's Manual page 95

ENT
This trip will take you to an intermediate destination (Whitewater Bay) and
then a final destination (Key West). You could go to each destination using
the GOTO function as described in Chapter 4. (Select GOTO WWBAY, then,
upon reaching WWBAY, select GOTO KEYW.) However, for this sample
trip, the route capabilities of the GPS 95 will be utilized.
To create the sample route...
RTE
*Enter the longitude
Enter the longitude of Whitewater Bay
using the same steps
(W 081°10.500') in the same manner
shown above
as was used for the latitude.
Press ENT when you are finished.
(NOTE: You do not need to enter the
leading zero for degrees. Instead, you
may begin by pressing the "8" key.)
Press RTE and the RTE softkey, if
needed, to select the Route Definition
*Plus RTE softkey, if
Page.
needed
Press the right arrow to place the
cursor on the route number field.
Press CLR to select route 1. Notice
9-7