Garmin PERSONAL NAVIGATOR GPS 95 XL Owner's Manual page 126

The yoke mount has been designed for easy insertion and removal of your
GPS 95 if you wish to use the unit in another airplane or vehicle, to plan at
home, or to prevent theft.
To insert the GPS 95 into the yoke mount...
· Tilt the top of the GPS 95 into the yoke mount as shown.
· Engage the slot in the top of the GPS 95 into the raised bump in the
yoke mount bracket.
· Rotate the bottom of the GPS 95 into the yoke mount until the unit
latches securely into place.
· Connect the antenna or antenna cable. No other electrical connections
are required; all power and data connections are made through the 6-
pin connector mounted in the yoke mount bracket.
To remove the GPS 95 from the yoke mount...
C-9