TYAN S5535 Quick Installation Manual

S5535 Quick Installation Guide
Document # D2242-100 / Revision 1.0

Read Me First

1. The motherboard User's Manual is available for download from our Web site at http://www.tyan.com. Make
sure to read all precautions and instructions before you start installing the server board.
2. Refer all servicing to qualified personnel to avoid the risk of damage to the server board.
3. Exercise normal ESD (Electrostatic Discharge) procedures during system integration. TYAN/MiTAC
recommends wearing gloves and an anti-static wrist strap to avoid possible damage to the equipment.
4. Current processor socket design places the pins on the motherboard instead of the processor itself. Exercise
extreme caution when installing the processors as the manufacturer's warranty does not cover damage
inflicted upon the motherboard, including damage to the CPU sockets.
Package Contents (Retail Box Only)
Server Board x 1 SATA Cable x 5 USB 3.0 bracket x 1

Required Tools

Phillips Screwdriver Flat-head Screwdriver
Motherboard Placement
29
1
2
3
4
5
6
A
B
C
a
7 8 9 10
CONNECTORS
1 LAN1 +USB2.0 (J42) 16 SATA 6G Connector (SATA_6G_3)
17 SATA 6G Connector (SATA_6G_2)
2 DP1 Connector (J10)
3 18 SATA 6G Connector (SATA_6G_0)
DVI-I Connector (DVI-I)
4 USB3.0/DP2 (J12) 19 Intruder Header (INTRD1)
5 LAN2 + USB3.0 (J9) 20 FP Header (J15)
6 21 BAT Socket (XBT1)
Audio Ports (J19)
7 Front Audio Header (FP_AUDIO_1) 22 USB3.0 Header (J24)
8 Rear FAN (J17) 23 Speaker Header (J83)
9 TYAN Module Header (DBG_HD1) 24 24 pin Power Connector (ATX24P_1)
10 Front USB2.0 Header (FP_USB_3) 25 COM Port Header (J77)
11 USB typeA Connector (J27) 26 Front FAN (J20)
12 Front USB2.0 Header (FP_USB_2) 27 CPU FAN (J16)
13 SATA DOM Power Header (J81) 28 PSMI Connector (J31)
14 SATA 6G Connector (SATA_6G_5) 29 ATX 4 pin Power Connector (J18)
15 SATA 6G Connector (SATA_6G_1)
Jumper Cap On/Off
Without jumper With jumper installed
on pins 1 and 2
Jumper
Top View
1 2 3
Pins
Rear I/O Shield x 1 Quick Installation
Guide x 1
Anti-Static Wrist Strap
28 27 26 25
D F
E G
11 12 13 14 15 16 17 18 19
SLOTS
A PCIE x16 Slot (x16 link)
B
PCIE x1 Slot (x1 link)
C PCIE x8 Slot (x4 link)
D
DIMM0 (A1)
E DIMM1 (A0)
F DIMM2 (B1)
G DIMM3 (B0)
JUMPERS
a
Clear CMOS Header (J4)
b ME Header (J2)
c
Security Header (J1)
DOA/ RMA Reminder
NOTE: Please save and replace the CPU
protection cap when returning the server board
for service.
Top View
1 2 3
1
Install the Server Board
1
Insert the server board into the chassis.
2

Install the Processor

1
Open the socket levers.
Driver's and
Utilities DVD x 1
2
Open the CPU Socket Cover.
3
Install the CPU Heatsink
Apply the thermal
1
grease.
24
23
c
22
4
Install the Memory
21
1
Unlock the clips.
b
20
5
Install the Power Cable
Locate the External I/O Ports
LAN1/
USB2.0
2
Attach the server board to the chassis by securing
the screws on the designated locations.
3
Remove the CPU protection cap.
4
Install the processor and make
sure the gold arrow is located in
the right direction.
2 3
Install the CPU heatsink. Secure the heatsink screws.
2
Insert the memory module.
DP1 DVI-I
USB3.0/ LAN2/
DP2
USB3.0
NOTE: To avoid
damage, do not use
torque force greater
than 7kgf/cm (6.09
lb/n) on each screw.
5
Close the CPU Socket Cover.
6
Close the socket levers.
4
Connect the
heatsink fan cable.
3
Lock the clips.
Audio Ports