Preparing For Use; Air-Conditioning Without Installation - DeLonghi AIR CONDITIONER Instructions Manual

PREPARING FOR USE

The instructions below will enable you to prepare
your air conditioner for operation as efficiently
as possible.
Before use, make sure the air intake and outlet
grilles are unobstructed.

Air-conditioning without installation

Just a few simple steps and your comfort is en-
sured with your appliance:
• Fit the air exhaust hose in the housing at the
back of the appliance (fig. 1).
1
2
• Fit the window outlet (N) to the end of the
hose (K).
• Place the air conditioner near a window or
French window.
• Adjust the length of the hose to reach the
window.
• Make sure the air exhaust hose is unobstruc-
ted.
• Open the window or French window slightly
and position the outlet (fig. 2).
2
• If you have a double window, use the sucker
(Q) provided to hold the two parts of the win-
dow together (fig. 3).
1
3
You can also use the "adjustable bar" accessory
(T).
• Fit the window outlet in the housing in the
bar (fig. 4)
4
• Position the bar on the window sill and
adjust until it fits in the guides of the blind
(the length can be blocked with the pin pro-
vided), then lower the blind (fig. 5).
5
• Fit the air hose to the end of the window out-
let .
• Place the air conditioner near a window or
French window and connect the end of the
hose (fig. 7).
• Remove the cap at the back of the appliance
(G) and replace with the drain hose plus cap
(U) as shown in figure 6.
This enables the condensate to be drained
more easily at the end of the season.
See the section: "END OF SEASON OPERA-
TIONS".
5
2
1
2
1