Kenmore Microwave hood combination 665.61601 Use And Care Manual page 30

REPLACING THE COOKTOP AND OVEN LIGHTS
1, Unplug microwave oven or disconnect power.
3, Tip the grille forward, then lift out to remove.
I 1
2, Remove the bulb cover mounting screw and
carefully remove the
cover.
screw
4.
Lift up the bulb cover.
3, Replace bulb(s) with candelabra-base 30-watt
bulb(s) (Part No. 4393681) available from your
Sears Service Center.
4, Replace the bulb cover and mounting screw.
5, Plug in microwave oven or reconnect power.
1, Unplug microwave oven or disconnect power.
2, Remove the two vent grille mounting screws
located above the cover
(the two outer screws).
5, Replace the bulb with a candelabra-base 30-
watt bulb (Part No. 4393681) available from your
Sears Service Center.
6, Close the bulb cover.
7.
Slide the top of the vent grille into place. Push
I the bottom until it snaps
into place. Replace the
mounting screws.
8, Plug in microwave oven or reconnect power.
30