GE Monogram ZET857SYSS Installation Instructions Manual page 5

Cabinetry
30" t_uill-I_ ( o_veclio_ Ove_s
Tools and
materials
required
Framed cabinet
double oven
• 2"x 4" lumberfor runners
• Saw
• Level
• Phillips screwdriver, wood screws and adhesive or other
hardware for installing runners or shelf to support oven.
Ovensare designedfor installation in a cabinet 30" rain. wide.
• Out 2" x 4" runners of appropriate length or solid shelf to
support oven.
• Attach runnersor solid shelf in opening as shown.
• Runnersmust be level, rigidly mounted and capable of
supporting 3(}0pounds.
Front Framed
Partial OverlayDoor
Front FramedFull
Overlay Door
Allow 3/4" Overlap
on Sides.Allow
1"Min. for Top
Overlapand Clearance.
Allow 1/4" at Bottom
for Clearance.
23-1/2"Min.
_"Recommended
Use the inlormation in this dimension drawing tor
typical trained cabinets. The tvont titce of"the oven
will be f]ush with cabinetry doors or drawers.
Order a double oven cabinet.
Rough opening for double oven must be:
• I)epth--23-1i2" min. fiom inside back to tront of
cabinet fl-ame.
• Width--28" rain., 28-3/8" max.
• Height--47-5/8" rain., 47-3/4" max.
Allow Minimumof 17-3/4"for Clearance
to AdjacentCorners,Drawers,or Walls, etc.
• Installing 12" from floor will place base of upper
i)verl at cotnlteltop
level.
-May be more than 12" from floor, depending
upon user preference.
• These Monogram ovens require 3/4" overlap to
both sides. Allow 1" rain. fbr top overlap and
clearance to upper doors.
• t)ven overlaps will conceal raw edges on the top and
both sides of the cutout.