Before Starting; Step 1: Write Down The Security Key From Logitech Alert Commander; Step 2: Add The Device To Your Powerline Network - Logitech HD Powerline 200a Manual

Powerline Network Utility NA200

Before Starting

1. Write down the 16-character PWD from the powerline device you wish to add to your existing
powerline network (the devices that are not part of the Logitech Alert camera system). On
Logitech powerline products the PWD is found on the label on the device between the PID and
MAC addresses.
2. Plug in the HD 200a network adapter into the outlet and device where you need it.
3. Run the Powerline Utility on the PC that is running Logitech Alert Commander.

STEP 1: Write down the security key from Logitech Alert Commander

Because you use the Logitech Alert Video Security System and Cameras, and you have set a security key
for your Alert camera system, the Alert security key is your powerline network password.
1. Launch the Alert Commander app on your PC.
2. Go to Settings > Security and Web > Advanced and write down the security key in the Secure
Local Camera Network checkbox.
3. Exit Alert Commander properly.

STEP 2: Add the device to your powerline network

1. On the Main tab, click "Add Device." The new Logitech devices will not appear in the main list.
The Add Device to Network Devices dialog will appear, asking you to enter your powerline
network password and the 16-character device PWD for the specific device you want to add. It
looks like this:
2. In the Powerline Network Password field, enter the password you have chosen for your
powerline network. This will be used for the network password for the specified powerline
network adapters. All of the powerline network adapters with the same network password will
be on the same network.