Step 3: Follow Case 3 And Case 4 To Get The Logitech Alert System Secured With The Powerline Network Password; Case 3: Secure Logitech Alert And Other Powerline Device; Before Starting; Set A New Local Network Security Key - Logitech HD Powerline 200a Manual

Powerline Network Utility NA200
4. Plug in the Logitech Alert cameras and camera power supplies where you need them. You may
want to temporarily plug them into outlets in the same room as the Logitech Alert network
adapter until after you have discovered the cameras and secured your local camera network.
STEP 3: Follow CASE 3 and CASE 4 to get the Logitech Alert system secured
with the Powerline Network Password.

Case 3: Secure Logitech Alert and other powerline device

I have a Logitech Alert Video Security System and have not set a network password. I also have an HD
200a Powerline Starter Kit (and Logitech Revue, laptop, X-Box, or other HomePlug AV powerline
device) connected to my network. It's all working fine. Now I have decided to secure my HomePlug
network by setting a network password.

Before Starting

1. Write down the 16-character PWD for each powerline device you wish to have on your
powerline network (the devices that are not part of the Logitech Alert Camera system). On
Logitech powerline products the PWD is found on the label on the device between the PID and
MAC addresses.
2. Plug in the HD 200a network adapter to the outlet and device where you need it.
3. Run the Powerline Utility on the PC that is running Logitech Alert Commander.

Set a new local network security key.

1. For your Logitech Alert cameras and their network adapter NA750, use the advanced option in
the Settings>Security and Web dialog. The Logitech Alert Commander software will let you
easily set a local network security key, which will also be used for the network password for your
cameras and the powerline network adapter connected to your router. When you use
Commander to set this password, it is passed to the PC and Cameras first, then these provide
the password to the network adapter and camera power supplies attached to them.
2. Now that the network password has been set for your Logitech Alert system, follow the
procedure in Case 4 below for the other devices on your powerline network.

Case 4: Add device to Logitech Alert network

I have a Logitech Alert Video Security System and I have set a password. I want to add the HD 200a
Powerline Starter Kit to my network so it can connect to my Logitech Revue, laptop, X-Box or other
HomePlug AV powerline device .