Diagnostics Tab Overview - Logitech HD Powerline 200a Manual

Powerline Network Utility NA200
Use Default (Public Network)
Set Local Device Only
Set ALL Devices

Diagnostics Tab Overview

The Diagnostics tab displays details and PWD numbers for the devices recognized by the Utility on the
powerline network. You can also generate a Diagnostics Report.
If you run the Diagnostics report, the utility creates a plc.data file, as well as a text (.txt) file that you
designate in the Save As dialog (i.e. powerline-report-11-10.txt).
Reset the Powerline Network Password back to "HomePlugAV".
Use this button only when you want to apply the network password to the
powerline device that is connected to the same router as your PC. In this
case, the new device will be (temporarily) plugged into your router or PC, so
it is operating as a "local" device. This safely changes the password in the
new device, without affecting any other units on your powerline network.
Use this button when you want to apply the Powerline Network Password to
all devices on the network.
DO NOT USE "Set ALL Devices" unless you have all PWDs entered for the
devices on the homeplug network. (See instructions: "Assigning the PWD to
the network device."). DO NOT USE this option if you are using Logitech
Alert Security cameras. Also, DO NOT USE this option if you are using
powerline devices that are part of a Logitech Alert System.