Privacy Tab Overview - Logitech HD Powerline 200a Manual

Powerline Network Utility NA200

Privacy Tab Overview

IMPORTANT NOTES
• "HomePlugAV" is the default network password for most HomePlug powerline devices, unless
otherwise specified by the manufacturer.
• You can choose a different password for the "Powerline Network Password" that is 4 to 24
characters or numbers long.
• To keep your network private, DO NOT SHARE your powerline password with others.
Logitech Alert Video Security Camera Users: DO NOT USE the Privacy tab to change all of the powerline
devices. The Logitech Alert system stores your network password for the cameras as well as each
camera's power supply. Using the PLC Utility's Privacy tab will NOT change the password in the Alert
Cameras, and will require a complex series of steps to bring your Alert system back on line.
The Privacy tab is applicable if you want to better secure your powerline network by setting a master
password for the local network device (i.e. router). It is also applicable if you are adding a powerline
device to the network and you want provide the network password for the new device, which will
enable it to join your private powerline network.
Screen Definitions
Powerline Network Password The default Powerline Network Password is "HomePlugAV." Use this field to
set a different network password for the local device (I.e. router). The
password can be from 4 to 24 characters in length.