Case 1 Addendum: Add The Device To Your Powerline Network - Logitech HD Powerline 200a Manual

Powerline Network Utility NA200
7. In the Device PWD field, enter the PWD # listed on the label on the bottom of the network
adapter. This password is case-sensitive and dashes between each set of four characters are
required.
8. Click OK.
The PWD # displays and is recorded for that device, and displays in the Device PWD column on
the Main screen.
9. Click on the second device so that its row in the list is highlighted and click on the Enter PWD
button.
10. Enter the second device's PWD by following instructions 7 & 8.

CASE 1 ADDENDUM: Add the device to your powerline network

If the new device doesn't appear on the Main screen, in the list of devices, complete these instructions:
1. Connect one powerline network adapter's Ethernet port to your router or to the Ethernet port
of the PC running the Powerline Utility. Plug the other network adapter into the outlet and
device where you need it. (Make not of that adapter's PWD).
2. In the Main tab, click "Add Device." The Add Device to Network Devices dialog will appear asking
you to enter your powerline network password ("HomePlug AV" is the default) and the 16-
character device PWD for the specific device you want to add. It looks like this: