Logitech HD Powerline 200a Manual page 4

Powerline Network Utility NA200
IMPORTANT NOTES
• "HomePlugAV" is the default network password for most HomePlug powerline devices, unless
otherwise specified by the manufacturer.
You can choose a different password for the "Powerline Network Password" that is 4 to 24
•
characters or numbers long.
• To keep your network private, DO NOT SHARE your powerline password with others.
2. In the Powerline Network Password field, enter the security password you prefer (from 4 to 24
characters long, alphanumerical).
3. Click "Set Local Device Only". The password is now stored in your powerline network adapter.
Repeat this procedure using the same password for each HD200a device you plan to use on your
powerline network.
4. Click on the Main tab screen. Check to see that the HD 200a Powerline network adapters you
provided passwords to are recognized by the network. (You can compare MAC addresses
showing for the devices in the main device list against the MAC addresses from the label of the
network adapter.)
If the network adapters DO NOT display on the list of devices, complete CASE 1 ADDENDUM:
Add the device to your powerline network, before continuing.
5. If the network adapters display on the list of devices, click on a device in the Powerline Devices
Detected table so that its row in the list is highlighted.
6. Click "Enter PWD" button on the bottom right of the Main page.