Garmin eTrex Vista C color map navigator Owner's Manual page 22

To display Data Fields:
1. With the Map Page Options Menu displayed, use the
ROCKER key to highlight the Data Fields option and press
ENTER.
2. Observe the sub-menu options: "Map Only," "2 Data Fields,"
"3 Data Fields," and "4 Data Fields."
You can choose to leave the Map Page as is (full page map),
or add two, three or four navigation data fi elds.
3. Highlight your choice and press ENTER.
To change Data Fields:
1. After you display data fi elds, a "Change Data Fields" option
appears on the options menu when you press the FIND key.
2. Select this option and press the ENTER key.
3. Press ENTER again to select from a list of types of navigation
data to display in the fi rst fi eld.
4. After making your selection and entry, use the ROCKER key to
move to the next fi eld and repeat the process.
For an explanation of what each option represents, see page 81 of
the Appendix.
eTrex Vista C
GPS Navigation
The Map Page
Data Field
Sub-Menu
Two Data
Fields
Three Data
Fields
Four Data
Fields
List of
Data Field
Options
11