Tones Setup; Page Sequence Setup - Garmin eTrex Vista C color map navigator Owner's Manual

Tones Setup

The Tones Setup Page allows you to customize the signal tones for a
variety of unit features.
To use the Tones Setup feature:
1. Access the Tones Setup Page.
2. Use the ROCKER key to highlight the feature for which you
want to set a tone and press ENTER to display the options menu.
3. Highlight the desired option and press ENTER. As you move
down the list each different tone sounds.

Page Sequence Setup

The Page Sequence Setup Page allows you to reorder any of the Main
Pages, or add pages when you cycle the QUIT key. If you add a page to
the sequence, it longer appears in the Main Menu.
To move, insert or remove a page:
1. Access the Page Sequence Setup Page.
2. To move a page in the order, highlight the page and press
ENTER. Select "Move," then move Up or Down until the
desired position is displayed and press ENTER.
3. To insert a new page, highlight the page you wish to insert the
new page before in the order and press ENTER. Select "Insert",
then choose a page from the displayed list and press ENTER.
4. To remove a page, highlight the page and press ENTER. Select
"Remove" and press ENTER.
eTrex Vista C
GPS Navigation
Tones Setup
Page Sequence Setup
Restores
to original
setting
Page Sequence Setup Page
Tones Sound
when high-
lighted
Check the
"Mute" box
to turn tones
off
Options
Menu
Adds all
pages to
the list
57