Transferring Data To A Microsd Card - Garmin eTrex Venture Cx, Legend Cx Owner's Manual

Transferring Data to a microSD Card

The eTrex utilizes a microSD card to store detailed
MapSource map data.
To install or remove the microSD card:
1. Remove the battery compartment cover from
the back of the unit.
2. Locate the card slot at the upper-left edge of
the battery tray, and insert the contact end of
the card in the slot with the contacts facing
away from the battery tray.
3. Press down on the card and release to eject.
4. Replace the battery cover when finished.
To transfer map data to the microSD card:
1. Lift the weather cover from the USB port on
the upper back of the unit.
2. Connect a USB cable to the USB port on your
PC and to the mini-USB port on the unit.
3. Follow instructions for downloading maps
provided with the MapSource map data disks.
NOTE: Do not remove the microSD card from
the unit while it is turned on, as corruption of
data can result.
eTrex Venture Cx and Legend Cx Owner's Manual
G S > U
ETTING TARTED SING THE E
T
REX
9