Internet fax settings
Settings for using Internet fax functions are specified from Web Con-
nection. For details on the settings, refer to the [Reference Guide].
[TCP/IP Settings]
Specify the necessary settings in order to use this machine in a TCP/IP net-
work environment.
[Network Fax Functions Settings]
Enable Internet fax functions.
[E-mail TX (SMTP)]
Enable the e-mail (Internet fax) transmission function. In addition, specify the
IP address of the SMTP server and the e-mail address of this machine.
When sending Internet faxes, [Binary Division] is always set to [OFF].
[E-mail RX (POP)]
Enable the e-mail (Internet fax) reception function. In addition, specify the
address, login name and password for the POP server.
[Subject]
Register a subject for the e-mail (Internet fax).
The subject can also be specified from the control panel before an Internet
fax is sent. For details, refer to "Specifying e-mail (Internet fax) settings" on
page 3-17.
[Text]
Register the message text for the e-mail (Internet fax).
The message text can also be specified from the control panel before an
Internet fax is sent. For details, refer to "Specifying e-mail (Internet fax) set-
tings" on page 3-17.
1-14
Initial settings