Registering A Program Destination - Olivetti d-COLOR MF3000 Operation Manual

Registering a program destination

The procedure for registering a program destination for fax transmission is
described below.
Program destinations can be registered from the control panel of this
machine or from Web Connection. The following procedure describes how to
register from the control panel of this machine.
For details on registering from Web Connection, refer to the [Refer-
ence Guide].
1
Press [Fax] or press the [Fax] key to display the initial Fax screen.
2
Press [Settings], and then select the appropriate settings on the [Scan
Settings], [Comm. Settings] and [Original Settings] screens.
–
For details on the [Scan Settings] screen, refer to "Specifying scan
settings" on page 3-11.
–
For details on the [Comm. Settings] screen, refer to "Specifying com-
munication settings (G3 fax)" on page 3-13, "Useful transmission func-
tions (G3 fax)" on page 3-14 and "Specifying e-mail (Internet fax)
settings" on page 3-17.
–
For details on the [Original Settings] screen, refer to "Specifying docu-
ment settings" on page 3-18.
3
Press the [Mode Memory] key.
4
Press [Register].
5
At [Name], enter the name.
6
At [Dest.], specify the destination.
–
Press
then press [OK].
7
Press [OK].
6-6
, select the address book or group destinations, and
Registering a program destination