Table of Contents
Advertisement
Important Messages to the Owner:
In the following paragraphs there may be some terminology that you are not familiar with. Reread this section after you familiarize
yourself with your security system.
Arming Your System with Doors or Windows Open: Any sensors which are open when the system is armed will be bypassed
after the exit delay has expired. This means they will not be protecting your home. If you wish to bypass a sensor after you have
armed your system, you must first disarm the system, then open the door or window which you want bypassed. Your system will
tell you if a protected door or window is open when you arm the system. If your system includes 24-hour protection sensors on
items such as gun or jewelry cases, you must do an additional disarm called subdisarm before accessing these areas to avoid
causing an alarm. The master access code and panic code can subdisarm. When the system is disarmed, using the Control Pan-
el, the Remote Handheld Touchpad, or Touchtalk 2-Way RF Touchpad, enter the master access code or panic code to subdisarm
the system. The Control Panel is subdisarmed when the Disarm button is flashing. If the panic code was used, an alarm will be
reported to the central station.
CAUTION! If you use the Control Panel to arm your security system when leaving your home, you need to be aware of the fol-
lowing: You need to exit before the end of the delay period or an alarm will sound. Remember, when you arm you will hear 2, 3,
or 4 beeps at the beginning of the exit delay (see the table "Panel Beeps" on page 3 of this manual to determine the meaning of
control panel/system beeps). At the end of the exit delay, the system beeps 2, 3, or 4 additional beeps. If you exit at that time
(after the exit delay), your system assumes you are now returning to your home. The system is now counting down the entry
delay time and will expect you to disarm the system within the entry delay time or it will alarm.
Something may have happened while you were away! If you enter your home and controlled lights that are normally off are
on and/or you hear alarm sirens, an intruder may be inside or another emergency may have occurred. Leave immediately, and
call for non-medical emergency help.
Canceling Accidental Alarms: You have up to 120 seconds (programmable by the installer) after causing an accidental alarm to
disarm your security system. See your installer to determine this amount of time. If the programmed seconds have passed, you
must call the central monitoring station to cancel the alarm.
Notices for UL-Listed Installations:
•
This system is suitable for Grade A household burglary applications.
•
The Freeze Sensor, Glass Guard and Shock Sensors are not UL Listed.
•
The garage door opening feature used with this system has not been evaluated by UL.
TABLE OF CONTENTS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Security System Beeps, Lights, and Messages . . . . . 3
How to Use Your Control Panel . . . . . . . . . . . . . . . . . . . 5
How to Use Your Touchpads . . . . . . . . . . . . . . . . . . . . . 8
Programming Your System . . . . . . . . . . . . . . . . . . . . . . 9
System Tests & Trouble Beeps . . . . . . . . . . . . . . . . . . .12
Your Emergency Evacuation Floor Plan . . . . . . . . . . . .14
Alarm System Limitations . . . . . . . . . . . . . . . . . . . . . . .15
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Quick Reference Table . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
1
Advertisement
Table of Contents
