Oven Light; Troubleshooting - KitchenAid W10524723A Manual

The oven light is a standard 40-watt appliance bulb. Before
replacing, make sure the oven and cooktop are cool and the
control knobs are in the off position.
2. Turn the glass bulb cover in the back of the oven
counterclockwise to remove.
3. Turn bulb counterclockwise to remove from socket.
To Replace: 4. Replace bulb, then bulb cover by turning clockwise.
1. Unplug range or disconnect power. 5. Plug in range or reconnect power.
TROUBLESHOOTING
First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)
to possibly avoid the cost of a service call.
www.kitchenaid.com
In Canada, reference the Customer Service section at www.kitchenaid.ca.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
PROBLEM POSSIBLE CAUSES SOLUTIONS
Nothing will operate Power supply cord is unplugged. Plug into a grounded 3 prong outlet.
Household fuse is blown or a Replace the fuse or reset the circuit breaker. If the problem continues,
circuit breaker is tripped, call an electrician.
Main or regulator gas shutoff See the Installation Instructions.
valve is in the off position.
The range is improperly Contact a trained repair specialist or see Installation Instructions.
connected to the gas supply.
Surface burners will not The control knob is not set Push in knob before turning to a setting.
operate correctly.
Air in the gas lines If this is the first time the surface burners have been used, turn on any
one of the surface burner knobs to release air from the gas lines.
Clogged burner ports See "Sealed Surface Burners" section.
Surface burner flames are Clogged burner ports See "Sealed Surface Burners" section.
uneven, yellow and/or noisy
Burner caps positioned See "Sealed Surface Burners" section.
improperly
Range converted improperly If propane gas is being used, contact a service technician or see
cover for contact information.
Excessive heat around Cookware that is not the proper The cookware should be centered above the burner with the bottom
cookware on cooktop size sitting level on the grate. The flame should be adjusted so that it does
not extend up the sides of the pan.
Cooktop cooking results Improper cookware Ideal cookware should have a flat bottom, straight sides and a well
not what expected fitting lid, and the material should be of a medium to heavy thickness.
Control knob set to incorrect heat See "Cooktop Use" section.
level
Range is not level Level the range. See the Installation Instructions.
18