Creating A Vlan; Configuring Dhcp Relay - ZyXEL Communications GS1910 User Manual

ID, VLAN ID and port number in the DHCP request. Client A connects to the Switch's port 2 in VLAN
102.
DHCP Server
192.168.2.3

5.8.1 Creating a VLAN

Access the web configurator through the Switch's port which is in VLAN 1.
1
Configure port 2 as a member of VLAN 102. See
2
and configure ports to join the VLAN.

5.8.2 Configuring DHCP Relay

Click Configuration > Security > Network > DHCP > Relay.
1
Select Enabled in the Relay Mode field to enable DHCP relay on the Switch.
2
Enter the DHCP server's IP address (192.168.2.3 in this example) in the Relay Server field.
3
Select Enabled in the Relay Information Mode field to allow the Switch to add relay agent
4
information (such as the VLAN ID) to DHCP requests.
Select Replace in the Relay Information Policy field to have the Switch remove the original
5
DHCP relay agent information (if any) and add new information in the DHCP requests.
Click Save to save your changes back to the Switch.
6
GS1910/XGS1910 Series User's Guide
Port 2
PVID=102
A
172.16.1.18
Section 5.4 on page 38
Chapter 5 Tutorials
VLAN 102
for how to create a VLAN
49