Mac Filter - ZyXEL Communications MAX208M User Manual

Chapter 8 Security
This screen contains the following fields:
Table 50 IP Filter
LABEL
Active
Source IP
Source Port
Destination IP
Destination Port
Protocol
Delete
Add
OK

8.3 MAC Filter

Use this screen to allow ("whitelist") or block ("blacklist") connections to and from specific devices
on the network based on their unique MAC addresses.
Note: This feature only works when the WiMAX Device is in bridge mode.
126
DESCRIPTION
Indicates whether the current IP filter is active or not.
This displays the source IP address for the IP filter rule.
Click Add to create a new, empty rule, then enter the incoming IP address for
the WiMAX Device to block.
If you want to delete this rule, click the Delete icon.
This displays the source port number for the IP filter rule.
Click Add to create a new, empty rule, then enter the incoming port number for
the WiMAX Device to block.
If you want to delete this rule, click the Delete icon.
This displays the destination IP address for the IP filter rule.
Click Add to create a new, empty rule, then enter the outgoing IP address for
the WiMAX Device to block.
If you want to delete this rule, click the Delete icon.
This displays the destination port number for the IP filter rule.
Click Add to create a new, empty rule, then enter the outgoing port number for
the WiMAX Device to block.
If you want to delete this rule, click the Delete icon.
This displays the protocol blocked by the IP filter rule.
Click Add to create a new, empty rule, then select the protocol type for the
WiMAX Device to block.
If you want to delete this rule, click the Delete icon.
Click this to delete a specified rule.
Click this to add a new filter rule.
Click this to save any changes made to the list.
WiMAX Device Configuration User's Guide