Page 2
Status Information Card Installation ❑ Switch off the Paragon UPS using the “on/off” button located on the front panel of the unit (see the Paragon Series User Manual). ❑ Disconnect from the power supply. ❑ Unscrew the communication card cover at the rear of the unit.
Page 3
• Pins 2 and 5 receive the customer “Emergency Power Off” command: S1 wiring, max. length 10m, see diagram below (pin 5 remains connected to 0V). • Opening of external contact S1 immediately shuts the Paragon UPS off. • The “Emergency Power Off” configuration only works if pin 5 remains connected to 0V.