Starting Address; Dmx Values; 8-Ch - Chauvet Intimidator Beam LED 350 User Manual

Starting Address

DMX Values

Channel Function

8-CH

1
2
3
4
Intimidator™ Beam LED 350 User Manual Rev. 2
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product's channels.
The Intimidator™ Beam LED 350 uses up to 14 DMX channels in 14-CH DMX mode,
which defines the highest configurable address to 499.
If unfamiliar with DMX, download the DMX Primer from www.chauvetlighting.com.
To select the starting address, do the following:
1. Press <MODE/ESC> repeatedly until d001 shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER>.
Pan
Tilt
Color Wheel
Gobo Wheel
Value Setting
000 ó 255
0~540°
000 ó 255
0~270°
000 ó 006
White
007 ó 013
Yellow
014 ó 020
Pink
021 ó 027
Green
028 ó 034
Red
035 ó 041
Light Blue
042 ó 048
Kelly Green
049 ó 055
Orange
056 ó 063
Dark Blue
064 ó 070
White + Yellow
071 ó 077
Yellow + Pink
078 ó 084
Pink + Green
085 ó 091
Green + Red
092 ó 098
Red + Light Blue
099 ó 105
Light Blue + Kelly Green
106 ó 112
Kelly Green + Orange
113 ó 119
Orange + Dark Blue
120 ó 127
Dark Blue + White
128 ó 191
Color cycling rainbow with increasing speed
192 ó 255
Reverse color cycling rainbow with increasing speed
000 ó 047
Gobos 1-6
048 ó 063
Animation effect (static)
064 ó 079
Animation speed (slow to fast)
080 ó 087
Gobo 5 shake, from slow to fast
088 ó 095
Gobo 4 shake, from slow to fast
096 ó 103
Gobo 3 shake, from slow to fast
104 ó 111
Gobo 2 shake, from slow to fast
112 ó 119
Gobo 1 shake, from slow to fast
120 ó 127
Open
128 ó 191
Cycle effect with increasing speed
192 ó 255
Reverse cycling effect with increasing speed
Page 11 of 19