Table of Contents
Advertisement
Turntable Installation
.
Place the roller rest on the cavity
bottom.
•
Turntable
hub should securely
locked in the receptacle.
Never
place the turntable
upside
down.
•
The turntable
rotation should never
be restricted.
•
Place the turntable
on top of the
roller rest as shown in the diagram.
•
Both turntable
and roller rest must
always be used during cooking.
•
All food and containers
of food are
always placed on this turntable
for
cooking.
• This turntable
rotates clockwise
or
counterclockwise;
this is normal.
Turntable
Hub(underside)
Roller rest
INSTALLATION
Remove all packing
material and accessories.
Examine the oven for any damage
such as dents or broken door.
Do not install if oven is damaged.
3-
OPEN
.
Select a level surface that provides
enough open space for the intake and/or
.o_lQt vents.
A minimum
clearance
of 3 inches (7.5 cm) is required between the oven and
any adjacent
wall. One -side must be open.
•
Leave a minimum
clearance
of 3 inches (7.5 cm) above the oven.
•
Do not remove the legs from the bottom of the oven.
•
Blocking
the intake and/or outlet openings
can damage
the oven.
•
Do not install oven over a range, cooktop
or other heat-producing
appliance.
2.
Plug your oven into a standard
120-volt / 60-Hz household
outlet.
Be sure the electrical
circuit is at least 15 amperes
and that your microwave
oven is the only appliance
on the circuit.
NOTE- This unit is not designed
for 50 Hz or any circuit other than a 120-volt/60-Hz
AC circuit. This oven is designed
for countertop
installation
only, Insertion
into a
cabinet or wall will damage
the product and void the warranty.
9
Advertisement
Table of Contents
