Kenmore 85651 Use And Care Manual page 11

"HI-POWER" COOKING
1. Touch CLEAR, and a beep tone will be heard. The
CLEAR erases all previous settings.
2. Touch TIME. "'0" will show in the display window.
3. Touch the correct numbers on the control panel to set
the cooking time. The time set will show in the display
window at the top of the control panel. For example:
• To set 30 seconds, you would touch "3" and then
• To set 3 minutes, touch "3", "0" and "0".
• To set 31/2 minutes, touch "3", "3" and "0".
Remember, the timer is a digital clock that is divided
into 60 seconds. Therefore, I/z minute is equal to 30
seconds. Touch 30 and not 50 as with a calculator to
indicate I/2.
NOTE: It is not necessary to touch COOK CONTROL
when cooking with the highest power ("HI"). However, if
COOK CONTROL is touched, the word "HI" will show
in the display window. This is to let you know that the
oven will be operating on "HI" power unless a different
power setting is chosen.
.
Touch START. The oven will begin cooking, and the
display window will show the time counting down in
seconds.
A tone will sound and the word "End" will show in the
display window for two seconds when the cooking
time is completed. Then the oven will shut itself off.
NOTE: To stir food during cooking: open the oven
door; stir or turn the food; close the oven door; and
touch START. The oven will automatically continue to
count down the amount of time left on the timer.
EXAMPLE: Fresh fish can be cooked quickly on "HI"
(maximum power) for 6 minutes. To do this, follow these
4 simple steps:
1. Touch CLEAR.
2. Touch TIME.
Kenmore =m= T
.
Set 6 minutes by touch-
ing "6", "0" and "0".
"600" will show in the
display window,
IKenmore
L ..... " " J
555 5
.
Touch START. The oven will
begin to cook, and the time
will count down in the display
window.
A tone will sound and the
word "End" will show in the
display window for 2 seconds
when the 6 minutes are over.
Then the oven will shut itself
off.
- , 7
555
11