Kenmore 85651 Use And Care Manual page 17

TEMPERATURE CONTROLLED "HI-POWER"
COOKING AND AUTOMATIC "HOLD WARM"
The "Temperature Controlled Meat Cooking Guide" and "Reheating Guide" on Pages 15 and 16 will show you which
multi-power setting and doneness temperature are recommended for the food you are cooking. When cooking with the
temperature controlled settings, the timer is not used.
I. Place the temperature probe into the food with the first
inch of the sensor in the center of the food. Adjust the
length of the temperature probe by sliding the grom-
met before inserting it into food so that the sensitive
area of the probe can
always be placed in the
center of the meat. The
probe should be in a
level direction or on an
angle as shown. It
should not be put
in from the top.
.
Plug the temperature
probe into the socket on
the side of the oven.
CAUTION: Do not plug
the pointed end of the
temperature probe into
the socket.
3. Touch CLEAR.
4. Touch TEMP CONTROL.
"F" will show in the display
window.
5. Choose the food temperature
and touch the corresponding
numbers. For example, if the
recipe calls for doneness at
120°F. you would touch the
numbers "I". "2" and "0".
When you touch "120" the
display window will show
"I20F". If the temperature
probe is not plugged into the
socket, the oven will not
start.
L_CEE
999 9
NOTE: It is not necessary to touch COOK CONTROL
when you are cooking with "HI (MAX POWER)".
However, if you touch COOK CONTROL the word
"HI" will show in the display window. This is to remind
you that the oven will work at "HI (MAX POWER)"
unless a different power setting is chosen.
6. Touch START. The oven will
begin to cook and you will be
able to see the temperature of
the food rising in the display
window once it exceeds 115°F.
A tone will sound for one
second when the desired
temperature is reached.
,--=n
K ...... E£2_r_:
Ex3r--_n _E_
CZ2C_3_
_EE3_
909
.
The oven will switch into
"Hold Warm" to keep the
food warm. "Hold" will show
in the display window. The
cook control setting changes
to "Power level I". To check
the temperature being held,
touch TEMP CONTROL.
The "holding" temperature
will show in the display
window. The "Hold Warm"
will continue for 60 minutes
after the food reaches the
chosen temperature or until
the door has been opened or
until STOP has been touched.
If the door is opened, the
"Hold Warm" will stop. To
reset, simply touch TEMP
CONTROL, the correspond-
ing numbers and START.
CE3
K ...... f'-r-IC3E3f-_
......... i"z"lF-_ F'-_
I 7 I! a II 9 ,
E2E)_r_r-
NOTE: The highest temperature
to which the food may be set is
185°F. The temperature is dis-
played in 5°F increments.
17