Kenmore 85651 Use And Care Manual page 24

QUESTIONS AND ANSWERS
OPERATION
Q What is wrong when the oven light will not glow during cooking or when tile oven door is open?
A.
There may be several reasons why the oven light will not glow. Perhaps:
• TIME has not been set.
• The light bulb has burned out.
• START has not been touched.
Q. Why does steam come out of the grill work?
A. Steam is normally produced during cooking. The microwave oven has been designed to vent this steam out
the grill work.
Q. Will the microwave oven be damaged if it operates empty?
A. Yes. Never operate the oven empty or without the glass tray.
Q, Does microwave energy pass through the viewing screen in the door?
A. No. The metal screen bounces the energy back into the oven cavity. The holes (or ports) are made to
allow light to pass through. They do not let microwave energy pass through.
Q. Why does the "beep tone" sound when a "pad" on the control panel is touched?
A. The "beep tone" sounds to assure that the setting is being properly entered.
Q.
A.
Can my microwave oven be damaged if food is cooked for too long a period of time?
Like any other cooking appliance, it is possible to overcook food to the point of destruction which may result
in the food creating smoke and even possible fire damage to the inside of the oven. It is always best to attend
the oven while it is in the cooking process.
Q. When the oven is plugged into a wall outlet for the first time, it might not work properly.
What is wrong ?
A. Only when the oven is plugged in for the first time or when power resumes after a power interruption, the
microcomputer used in the oven control assembly may temporarily become scrambled and fail to function
as programmed.
Unplug the oven from the 120-volt household outlet and then plug it back in. The microcomputer will be
reset for proper function thereafter.
Q. Why do I see light reflection around the outer case?
A. This light is from the oven light which is located outside the oven cavity.
24