When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord Your Black & Decker drill/screwdriver EPC126/EPC146/ suitable for outdoor use reduces the risk of electric shock. EPC186 has been designed for screwdriving applications and f.
d. Store idle power tools out of the reach of children and Hold power tool by insulated gripping surfaces when do not allow persons unfamiliar with the power tool or performing an operation where the cutting accessory these instructions to operate the power tool. Power may contact hidden wiring or its own cord.
Labels on tool Electrical safety The following pictograms are shown on the tool: Your charger is double insulated; therefore no earth wire is required. Always check that the mains Warning! To reduce the risk of injury, the user must voltage corresponds to the voltage on the rating read the instruction manual.
Using the charger To remove the screwdriver bit from the bit holder, lift the bit from the recess. To charge the battery (7), remove it from the tool and slide To store the screwdriver bit, firmly push it into the holder. the charger receptacle (10) onto the battery.
Drilling in masonry (fig. H & I) Warning! Before performing any maintenance on the tool, For drilling in masonry, set the collar (3) to the hammer remove the battery from the tool. Unplug the charger before drilling position by aligning the symbol with the marking cleaning it.
Technical data Level of sound pressure according to EN 60745: EPC126 (H1) EPC146 (H1) EPC186 (H1) Voltage 14.4 Sound pressure (L ) 87 dB(A), uncertainty (K) 3 dB(A) No-load speed 0-450/ 0-450/ 0-400/ Sound power (L ) 98 dB(A), uncertainty (K) 3 dB(A)
Guarantee Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country.
Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place Fax +64 9 259 1122 Mt Wellington Auckland 1060 United Kingdom Black &...