ENGLISH Use of an RCD reduces the risk of Your Black & Decker drill/screwdriver has been designed for electric shock. screwdriving applications and for drilling in wood, metal, plastics and soft masonry. This tool is intended for consumer use only. A moment of inattention while operating power tools may result in serious personal injury.
ENGLISH Power Cutting accessory contacting tools are dangerous in the hands of untrained users. a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock. Fasteners contacting a "live" wire Many accidents are caused by poorly may make exposed metal parts of the power tool "live"...
ENGLISH Additional residual risks may arise when using the tool which The charger is intended for indoor use only. may not be included in the enclosed safety warnings. These risks can arise from misuse, prolonged use etc. Even with the application of the relevant safety regulations Read the instruction manual before use.
ENGLISH This tool is supplied with a double-ended screwdriver bit in the bit holder (6). If the charger detects a weak or damaged battery, the To remove the screwdriver bit from the bit holder, lift the bit from the recess. follows: Re-insert the battery (7).
ENGLISH Before performing any maintenance on the tool, For drilling in masonry, set the collar (3) to the hammer remove the battery from the tool. Unplug the charger before drilling position by aligning the symbol with the marking cleaning it. (11).
ENGLISH 0-350/ 0-1500 43.7 25500 13/38/13 90581219 Input Voltage Output Voltage 20 (Max) Current Approx. charge time Voltage Capacity Type Li-Ion Australia Stanley Black & Decker Tel. 1800 338 002 82 Taryn Drive, Epping Vic, 3076, Australia New Zealand Stanley Black & Decker Tel.