Location Of Controls/Indicators - Jensen JCR-208 Instruction Manual

POWER FAILURE INDICATOR
If there is no battery installed in the unit or the battery installed is weak or dead,
the time and alarm settings will be lost if the power is interrupted. When the AC
power is restored the display will flash "12:00". This indicates that the time
displayed is incorrect and needs to be reset.
IMPORTANT:
After you reset the time, be sure to reset your alarm settings as well.
LOCATION OF CONTROLS AND INDICATORS
1. SNOOZE BUTTON
2. ALARM BUTTON
3. TIME BUTTON
4. SLEEP BUTTON
5. HOUR BUTTON
6. MINUTE BUTTON
7. FUNCTION SELECTOR
(ON/OFF/AUTO/ALARM)
8. TUNING CONTROL
13
9. VOLUME CONTROL
10. FM WIRE ANTENNA
11. AUTO INDICATOR
12. AC CORD
13. AM/FM BAND SELECTOR
14. HI-LO DIMMER
5
14