Table of Contents
Advertisement
How to Connect the Cable
Caution
Be sure to turn off your personal computer before connecting the
cable.
The DATA PORT is located on the
bottom of the UC-321P unit as
shown at the right.
1
Set the slide switch to "WEIGHT".
2
Insert the mini jack of the cable into
the UC-321P DATA PORT.
3
Connect the other end of the cable
(9 pin) to the RS-232C port of your
computer.
4
Start your computer.
Notes
Keep the cable straight and keep
the feet of the UC-321P off the
cable.
Gathering the excess length of
cable and putting it under the
scale is not recommended. This
can cause the UC-321P to give an
inaccurate reading.
Starting Weight Diary Software
Run the Weight Diary from START/ PROGRAM/ Weight Diary/ Weight
Diary.
You will find the instruction manual and the Weight Diary Help Menu in the
CD-ROM.
- 13 -
Advertisement
Table of Contents
