Advertisement
Basic Lighting Procedures
1. Familiarize yourself with the safety guidelines at
the front of this manual. Do not smoke while
lighting grill or checking gas supply connections.
2. Be sure the LP gas tank is filled.
3. Check that the end of each Burner Tube is properly
located overeach Valve Orifice.
4. Make sure all gas connections are securely
tightened.
5. Open the Grill Lid.
WARNING
To prevent
injury and damage
ensure
that:
• When using propane gas to light charcoal,
do not use propane for more than 10
minutes.
• Ensure the charcoal
basket is clean of old
ashes before operating
the gas burners.
• Never use propane and charcoal
at the
same time to cook.
WARNING
Failure to open Grill Lid during the
lighting
procedures
could result in a fire
or explosion
that could cause serious
bodily
injury, death or property
damage.
6. Set Control Knobs to OFF and open the LP gas
tank valve slowly until 1/4 to 1/2 open.
I
Open
LP
OFF
gas tank
7. Push and turn left Control Knob to HIGH. The built-
in spark ignitor will light the burner automatically.
I
HIGH
OFF i
J
8. If the burner does not light, turn the Control Knob
to OFF, wait 5 minutes for gas to clear, then retry.
9. Once the left grill burner is ignited, the adjacent
burner can be lit by simply turning its Control Knob
toHIGH.
10. Adjust the Control Knobs to your desired cooking
temperature.
15
Advertisement
