Zipper Sewing; To Snap On The Zipper Foot; Fabric Preparation; To Sew - Kenmore 385.17624 Owner's Manual

Zipper Sewing
(_ Stitch selector: 1
(&) Stitch width: 0
(_ Stitch length: 2
(_ Needle thread tension: 2 to 6
(_) Presser foot E: Zipper foot
o To Snap on the Zipper Foot
Fit the pin on the zipper foot into the groove on the foot holder.
* To sew the left side of the zipper, attach the zipper foot on
the right-hand side.
* To sew the right side of the zipper, attach the zipper foot on
the left-hand side
(_ Groove
(_ Pin
(_ When the left side is sewn
(_) When rhe right side is sewn
• Fabric preparation
(&) Right side of fabric
(_) End of opening
(_) Top edge of fabric
Q 3/4" (2°Ocm)
Place right sides, top side of fabric, together and sew to the
end of the zipper opening.
Reverse stitch to lock the stitche& Increase stitch length to 4
and set needle thread tension at O, Sew the zipper opening
with the basting stitch,
, To sew
(_ Zipper teeth
(&) Zipper tape
(&) Wrong side (Bottom side) of fabric
[] Fold back the left seam allowance. Turn under the right
seam allowance to form a 1/8" (02 to 0.3 cm) fold.
Place the zipper teeth 0 next to this fold and pin in place.
[] Attach the zipper foot with the pin of the foot on the right-
hand side.
Lower the zipper foot on the top side at the bottom of the
zipper so that the needle pierces the fabric next to the fold
and the zipper tape @,
Sew through all layers next to the fold,
@
®
_ WIDTH
_ LENGTH
@
®
®
® ®
.2
%
42