Kenmore 385.17624 Owner's Manual page 52

Zipper Sewing (Continued)
[] ® Right side of fabric
(_) Zipper pull
(_) 2"(5.0cm)
Stop Just before the zipper foot reaches the slider on the
zipper tape about 2"(5.0cm) from the top of the zipper_
Lower the needle slightly into the fabric, raise the foot.
Open the zipper to move the zipper pull (_ behind the
zipper foot,
Lower the foot and stitch the remainder of the seam,
making sure the fold is even.
%
[] ® Right side of fabric
Close the zipper and spread the fabric flat with the right
side (top side) of fabdc (_) facing up.
f
[]
[] Move the zipper foot to the left pin,
Guide the edge of the foot along the zipper teeth 0 and
stitch through the garment and zipper epenig.
%
®
®
[] Stop at about 2"(50cm) from the top of the zipper.
Lower the needle slightly into the fabric, raise the foot,
Open the zipper to move the slider (_ behind the zipper
foot.
Lower the foot and stitch the remainder of the seam,
making sure the fold is even,,
f
[]
®
44