Minolta MF3800 Operator's Manual page 216

Installing the SPCU
Unpacking & Installation
1
Take the (Optional) SPCU
from the shipping carton.
2
Remove the vinyl bag and
peel off the shipping tape.
3
Remove the shipping tape
and cardboard from the gear
area.
4
Remove any shipping
material and tape from the
Cassette cavity.
Before proceeding, make sure the Main ON/OFF Switch on the Fax
unit is in the OFF position.
5
Place the Fax unit on top the
SPCU making sure the three
Aligning Posts and the
Power Connector are
carefully aligned.
Setting Up the (Optional) SPCU
CAUTION
A - 14