Minolta MF3800 Operator's Manual page 100

For 1=Broadcast:
For 2=Timer TX:
Once this function has been programmed, you use it by
simply pressing the One-Touch Key you have just programmed. This is documented in
Chapter 3 Advanced Facsimile.
Facsimile Programming
3
Press the One-Touch Key you wish to use.
Remember, it must be one of the last eight.
4
Choose the function you wish to program:
1=Broadcast, 2=Timer TX, 3=Mailbox TX,
7=Polling RX, and 8=Relay Initiate.
Note: To continue with this process, choose the group of steps that match your needs.
5
A screen appears to confirm Broadcast was your
selection.
6
Enter the Key(s) you wish included in this group.
Remember, you can include One-Touch or Speed
Dial already in memory.
7
Continue to enter the locations you wish to include and then save. You are given the
opportunity to program additional locations. Continue to enter additional Speed Dial
locations or press NO to exit.
5
A screen appears to confirm Timer TX was your
selection.
6
Enter the time you wish the transmission to occur
and press YES.
7
Enter the fax number you wish to send to or select a
One-Touch or Speed Dial location and press YES.
Dial Registration
-SELECT REGIST.KEY-
FUNCTION
SEL. 1/2/3/7/8
BROADCAST
NO.001=_
TIMER TX
TIMER=_0:00
OK=YES
ENTER FAX NO.
or FUNCTION
4 - 22