Minolta MF3800 Operator's Manual page 110

Facsimile Programming
4
To select Memory RX ON, use the left and right
Arrow Keys to select ON and press YES.
5
Enter the time you wish to start receiving messages
into memory.
Note: If the ON and OFF time are identical,
messages will always be received into
memory.
6
Enter the time you wish to stop receiving messages
into memory.
7
You have to enter a password for this to work.
8
If you have your unit programmed for Memory RX
with the Timer turned ON and a Password required,
your screen shows the following message.
9
The ready message for your unit now shows that
Memory RX is active.
RX Operation
*ON OFF
-SELECT&PUSH"YES"-
ON TIME=_0:00
OK=YES
OFF TIME=_0:00
OK=YES
PASSWORD=
OK=YES
*M-RX-ON*
<T><PWD>
<<M-RX>> 100%
-SET DOC.FACE DOWN-
4 - 32