Download Print this page

Kenmore 141.15225 Owner's Manual page 9

Liquid propane gas grill

Advertisement

CAUTION:
While it is possible for one person to as-
semble this grill, obtain assistance from another person
when handling some of the larger, heavier pieces,
especially the grill head.
1. Open Lid of shipping carton and remove top sheet of
cardboard. Lay cardboard sheet on floor and use as
a work surface to protect floor and gdll parts from
scratches.
2. Remove packing materials and cart parts from
shipping carton.
3. You may slice the carton front corners with a utility
knife to lay open the carton front panel. This will
allow you to raise the grill head Lid and remove the
components packed inside the head, making it
easier to lift.
4. With an assistant, lift the gdll head out of the ship-
ping carton and place it on the cardboard work sur-
face. See Fig. 1.
5. Use the parts list to check that all parts have been
included.
6. Inspect the grill for damage as you assemble it. Do
not assemble or operate the grill if it appears
damaged. If there are damaged or missing parts
when you unpack the shipping box, or you have
questions during the assembly process, call:
1-888-317-7642
8 a.m. - 8 p.m CST, Mon. - Fri.
Figure 2
CART
LEG-RIGHT
Figure 3
BOTTOM
SHELF
HOLES FOR TANK_
HOLDER
CART
LEG-LEFT
GRILL HEAD
CART LEG-LEFT
Assembling
The Cart To The Grill Head
1. Lay the Grill Head flat on its back as shown in
Fig. 2. Unfold the 4 pre-assembled
Cart Legs
as shown in Fig. 2. Tighten securely
using 4 of
the 1/4"xl/2"
Pattern Head Screws provided.
2. Before attaching
the Bottom
Shelf to the Cart
Legs be sure the holes for the Tank Holder on
Bottom Shelf are located on the dght.
3. Install the Bottom Shelf between the Cart Legs.
Align the holes on Cart Legs with the threaded
holes at the corners of Bottom Shelf. Tighten
securely
using 8 of the 1/4"x2" Pattern Head
Screws provided. See Fig. 3.
4. Screw the 4 Casters into the Caster Seats (see bottom
of Cart Legs). Turn the threaded Caster Stem by hand,
clockwise until it stops. Tighten securely by using the
Customized
Wrench
provided. See Fig. 4.
Figure
1
_RILL HEAD
Figure 4
CART
LEG-RIGHT
CASTER
BOTTOM
SHELF
_.
GRILL
HEAD
CART LEG-LEFT
CART LEG-RIGHT
GRILL
HEAD
9

Advertisement

loading